RadioLink RC6GS V3 7 Channel RC Radio Transmitter with R7FG Gyro Receiver 

RC6GS V3 6 Channels RC car controller with good performance will enhance your driving experience

New Features for the RC6GS V3(V2 Upgrade):

• 7 Channels
• 30 models memory storage
• One switch to active the D/R setup
• One switch to active the EPA setup
• One switch to active different mix control
• Timer function for racing and training
• Low battery voltage of each model can be setup independently
• Support head tracking /simulator /crossfire

Setting simplicity, Fast Response for 7 Channels, 30 Models Memory Storage, telemetry of Maximum 8S Vehicle Battery Voltage, Dual Mix Programmable Control, Cruise Control, USB upgrade firmware, Throttle Lock, Voltage Protection, ABS and fail-safe protection, 10 Subsidiary ID, outstanding long range up to 600 meters and more features. (Actual control distance is according the local environment)

RC6GS V3 is an ideal partner for all types RC cars and boats in the market including single-engine and twin-engine models such as Crawlers, Tanks, Caterpillars, Basher, RC Short-Course Truck, RC Crawler, Drifting, Gasoline RC Car, Mini RC Car, RC Monster Truck, Off-Road RC Car and other types of RC cars or boats.

RC6GS V3 RC Remote Control Transmitter Features:

1.【Excellent Anti-interference】: Real pseudo random algorithm FHSS communication technology makes RC6GS V3 control distance up to 1900 feet (600 meters), and over 20 units of RC6GS V3 can work simultaneously at one place without any interference.

2.【Up to 600M Ground Distance】: The control distance is up to 600 meters under the superior anti-interference ability.

3.【30 Models Memory Storage】: Up to 30 models memory can be saved and each model can be set up and named separately.

4.【Dual Programmable Mix Control】: Mix control can be programmed with any two channels and each mix control can be turned on by one switch. That’s friendly for twin-engine vehicles, such as tanks, boats, 4 wheel steering car.

5.【Throttle & Steering Dual Rate】: Support one switch to active the servo deviations.

6.【Two-way Transmission Return】: Real-time signal strength, RX battery voltage and vehicle battery voltage(telemetry of maximum 8S)can be displayed on the radio screen.(Only support works with radiolink R7FG or R8F receiver)

7.【Built in Gyro】: R7FG built-in gyro can keep the vehicle running in a straight line, and Gyro sensitivity can be adjusted by transmitter, which fits for drifting and on-road cars.

8.【Timer Function】: The timer allows you to grasp the lap and complete track results in time to help you train yourself before the race

9.【Customized Channels】: CH3-CH7 can be customized to VR, three-way switch and tact switch, the tact switch can be used for cruise control mode, a good idea for crawler, all channels’ fail-safe values can be set to any value as you need.

10.【3 Advanced Entertainment Modes】: The DSC port support connect simulator, head tracking and TBS crossfire, will bring you more diverse experience.

11.【Reverse Polarity Protection】: Anti-polarity connect protection technology to keep your transmitter safety even if you Accidentally connect the wrong positive and negative poles. JST connector supports multiple batteries: liPo or 6*AA.(NOT INCLUDED)

Note: All the Radiolink transmitter(with Sbus signal output) support work with ardupilot, pix4, beta, arduino, Raspberry Pi hardware.

RC6GS V3 Transmitter Specifications:

• Channels: 7
• Control Distance: Up to 600 meters
• Model: RC Cars and Boats
• Low Voltage Alert: Yes(Below 4.6V)
• Operating Voltage: 4.8-16.8V DC
• Operating Current: 80mAh-120mAh
• Screen: 128*64 resolution, LCD back light
• Spread Spectrum: FHSS
• Antenna Length: 106mm
• Frequency: 2.4GHz ISM band (2400MHz-2483.5MHz)
• Battery compartments: 25*97*60mm (JST 2Pin connector)
• Size: 22.4*17.5*11.6cm
• Weight: 323g
• Compatible Receivers: Radiolink R7FG/R8FG/R6FG/R6F/R4FGM/R4F/R8EF/R8FG/R8FGH

R7FG Receiver Specifications:

• Channels: 7
• Gyro inside: Yes
• Control Distance: Over than 600 meters
• Waterproof level: IPX4, water splash proof
• Signal output: PPM/PWM/S-BUS, 2.4GHz
• Receiver operating voltage: 3-12V
• Modulation Mode: GFSK
• Antenna Length: 200mm
• RF Power: <10dbm
• Channel resolution: 4096
• Working Current: 30mA
• Applicable model: rc car, boat
• Size: 3.5*1.8*1.5cm
• Weight: 6g

Standard Package List:

RC6GS V3 radio x1

R7FG receiver x1

XT60 Telemetry cable x1

Neck lanyard x1

User manual x1

Real-time Information Transmission

The telemetry feature can give you real-time information for reference, like vehicle’s battery voltage, RSSI, transmitters receiver’s battery voltage and more. Max Telemetry Voltage up to 8S(33.6V).

New Upgrade Functions of RC6GS V3:

*Video Display on YouTube: https://www.youtube.com/watch?v=0H5zo-yfWdw

Gyro Inside the Receiver

The integrated gyro in receiver will help you automatically correct the servo directions, which works well for on/off road vehicle’s model.

Note: Keep the receiver plugs dry after driving in water

Low Voltage Alarm Page Show:

low voltage and RSSI alarm can be set independently for each model

Compatible Receivers Introduction

Manual

tutorial video

RC radio controllers and Transmitters | TechRoLK FPV Drone Store