IFlight Nazgul Evoque F5D FPV drone – 4s HD(Nebula Pro) ELRS with GPS (RTF)

Iflight Nazgul Evoque F5

Iflight Nazgul Evoque F5

Specs ;–

• IFlight Nazgul F5 deadcat v1 frame
• Nazgul XING2 2207 2750kV motors( black)
• IFlight F5 tri blade propellers
• Iflight BLITZ Mini F4 FC
• Iflight BLITZ mini E55s 4in1 ESC
• IFlight M8Q-5883 GPS V2.0
• Radiomaster RP1 V2 ELRS Diversity receiver 
• CADDX Nebula PRO vista HD system 
• TPU GoPro mount

Iflight factory PID tune is installed

Suggested components ( not included )

-Lipo battery – 4s 1500mah 120c

-4S 1300mah 120c Lipo

-ELRS radio transmitter- Radiomaster Boxer 1watt

–VIFLY beacon – wireless buzzer with lights

Iflight Nazgul Evoque HD F5D

The Secret Of Ultimate Performance Is Passion

That was the slogan for our newest approach to creating this piece of art! Fully protected electronics, fully illuminated, coupled with all the latest and greatest electronics we can offer. Months of engineering went into this BNF and all the lessons learned before, making sure that beginners, as well as experienced pilots, would fully enjoy using the new Nazgul Evoque from the first second they use it.

Lightweight Side Panels – Keep Your Rig Clean

Ever felt like a lawnmower cutting through the grass in your early days, props cutting and throwing wet grass all over and inside your flight stack? Well… These days are over! The new side panels will not only protect from wetness but also protect the internals from any strikes hitting off little components from your flight controller.

Secured Integrated XT60 Battery Plug – As Safe, It Can Be

Dangling battery plugs will ALWAYS find a way in your props, there’s always that one time you forgot to secure it properly and almost cut off the cable while flying. There was only one way to get rid of that and we think we might have found a solution. The integrated XT60 connector on the back lets you securely plug in your battery leading all cables away from your props.

High-Performance Electronics – F7 55A Power Stack

Our BLITZ Mini F7 TwinG flight control with Gyro Fusion technology, modern USB type-C plug, 32MB flash for every tuning session, and 5 UARTs for whatever equipment you might possibly wanna use. Power from the gods with our new BLITZ Mini 55A ESC packed with better heat-dissipating Mosfets and a whole bunch of SMD capacitors to filter out possible motor noise, besides the pre-soldered directly installed Capacitor right next to your battery leads.

XING2 Performance Motors – The Best Motors Just Got Better

7075 aluminum bell, 5mm titanium alloy shaft, NSK durable bearings, Center slotted magnets for better response, and lower air gaps for a higher magnetic flux with increased performance and efficiency. Not to mention the typical XING damping ring between the bell and bearing to increase durability and smoothen out your flights.

Illumination – Let It Be Green

360-degree illumination for day and night. Maybe the prettiest BNF out there but also a practical one. The bottom light indicates battery voltage, a quick check gives you a hint of the voltage still remaining; Never lift off with an empty battery again. Installed LED wires in the side panels and the bottom of the arms are also illuminated and gives you some style at the next night’s race.

Digital HD Experience – DJI Camera Vista

Equipped with the DJI Digital FPV system with 50mBit transmission for 720P video feed on your DJI FPV Goggles and range you’ve never expected with your old analog VTX. We are using the new DJI Camera Vista HD system, installed in the back of your quad. The DJI camera offers better image quality than other CaddX cams. Better low light performance and more detailed shadows. In daylight similar to the Nebula Pro with improved dynamic range.

Specifications:

– Total Dimensions: 136*190mm (body dimension)

– Geometry: Squashed-X or DC (DeadCat) frame available

– Bottom to top distance: 28mm

– Arm Thickness: 6mm

– Bottom plate thickness: 3mm

– Top plate thickness: 3mm

– Upper(middle) plate thickness: 3mm

– XING2 2207 motors (4S/6S)

– Nazgul F5 propellers

– Weight: 412g (without battery and GoPro mount)

FC // BLITZ MINI F4

Top Features:

– BlackBox: 16MB

– DJI Air Unit Plug-and-Play. No need to solder tiny wires.

– BAT, +5V, 3.3, Start indicator

– With LC filter.

Specs:

MCU：STM32F405

Gyro：MPU6000

Baro: NO

Betaflight OSD:  IFLIGHT OSD （AT7456E)

Blackbox: 16MB

UARTS: 6

I2C serial: SDA / SLA pads

Smartaudio / IRC Tramp VTX protocol supported

LED controller: Yes

Beeper pad: Yes

Firmware target : IFRC-IFLIGHT_BLITZ_F405

Mounting：20*20mm/φ4

Dimensions：30.5*27mm

Weight：5.0g

ESC // BLITZ Mini 55A

Specification:

Mounting Holes: 20*20mm/Φ4mm

Weight: 11.3g

Supports 2-6S lipo input

MCU: BB21

Constant: 55 Amps

Burst: 65 Amps

Telemetry Output: No

Current sensor: Yes

BEC: No

Current rate: 200

Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.

Target:   Q-H-25 16.7(BlheliS) / Bluejay Q-H-50 (Bluejay)

Package Includes;-

• Iflight Nazgul Evoque HD F5 Deadcat x1
• Drone stand
• Gopro mount -TPU
• Accessories for the parts