The FS90 is a 9 g analog servo from FEETECH (formerly known as Fitec) which is similar in form and function to the Towerpro SG90. The specifications state that this servo has a 120° operating angle for standard servo pulses between 900 µs and 2100 µs. As with most servos, the pulse range can be expanded to achieve an expanded operating angle, but the limits of which are not specified by FEETECH.
PRODUCT CONTENTS:
- 1 – FEETECH (formerly Fitec) FS90 Servo
- 1 – straight single ended servo horn
- 1 – straight double ended servo horn
- 1 – winged straight double ended servo horn
- 1 – four-pointed star servo horn
- 1 – round servo horn
- 1 – servo horn screw
- 2 – FS90 servo mounting screws
SPECIFICATIONS:
| Operating Voltage | ||
|---|---|---|
| 4.8V | 6.0V | |
| Stall Torque | 1.3 kg/cm (18.09 oz/in) |
1.5 kg/cm (20.86 oz/in) |
| Max Speed | 0.12sec/60° | 0.12sec/60° |
| Idle Current | 5 mA | 6 mA |
| No Load Running Current | 100 mA | 120 mA |
| Stall Current | 700 mA | 800 mA |
| Operating Voltage Range | 4.8V to 6V | |
| Pulse Width Range | 900 to 2100 µs | |
| Limit Angle | 120° (900 to 2100 µs) | |
| Dead Band Width | 10 µs | |
| Stop position | 1500 (±5) µs | |
| CW Rotation Signal Range | 900 to 1500 µs | |
| CCW Rotation Signal Range | 1500 to 2100 µs | |
| Internal Gears | Plastic | |
| Cable Length | 20 cm (7.9″) | |
| Dimensions (detailed dimensions) | ||
| Length | 32.6 mm (1.28″) | |
| Width | 12.5 mm (0.49″) | |
| Height | 27.3 mm (1.08″) | |
| Weight (of servo itself) | 9 g (0.32 oz) | |
| Weight (including horns and screws) | 15.1 g (0.53 oz) | |
RESOURCES
- FEETECH FS90 Datasheet
- Arduino “Knob” Tutorial: control the shaft of a servo motor by turning a potentiometer
- Arduino “Sweep” Tutorial: sweeps the shaft of a servo motor back and forth
- 3D printable linear movement servo mod
CONNECTOR PINOUT:
TechRoLK FPV Drone Store
Reviews
There are no reviews yet