DESCRIPTION
It looks like a servo, it acts like a servo, but it’s more than just a servo! We got a factory to custom-make these classic ‘standard’ sized hobby servos with a twist – the feedback (potentiometer wiper) line is brought out to a fourth white wire. You can read this wire with an analog input such as those on an Arduino, to get the servo’s position. That information can be used in robotics to improve stability or even allow ‘recording’ of servo motion.
This is the standard size Metal Gear Digital Servo. This solid consumer grade servo is able to take in 7.4 volts and deliver 17kg.cm of maximum torque at 0.16sec/60°.
This is a simple servo for any project with accuracy in motion!
This high quality servo is perfect for your mechatronic needs and if you are looking to get into robotics, this is where to start.
The FΒ5118M servo comes standard with a 4-pin power and control cable (red=power, black=ground, white=data and yellow=feedback) and all hardware listed below.
SPECIFICATIONS
Servo Standar : 25T (Futaba/Feetech)
Gear Type: Metal
Rotation: 270°
Servo Operation: Digital
Servo Size : Standard
Speed (6V): 0.20sec/60°
Torque (6V): 15kg.cm
SPECIFICATIONS
- Mechanical
- Gear type: Steel Gear
- Limit angle: No limit
- Bearing: 2 Ball bearings
- Horn gear spline: 25T(5.9mm)
- Horn type: Plastic,POM
- Case: Nylon & Fiberglass
- Connector wire: 300mm ±5 mm(Black ,Red, Yellow and White)
- Motor: Metal brush motor
- Splash water resistance: NO
- Size: 40×38.7×20.3mm
- Weight: 65g
- Electrical (Function of the Performance)
| Operating Voltage Range | 6V | 7.4V |
| Idle current(at stopped) | 5mA | 7mA |
| No load speed | 0.2sec/60° | 0.16sec/60° |
| Runnig current(at no load) | 130mA | 150mA |
| Peak stall torque | 15kg.cm | 17.5kg.cm |
| Stall current | 1500mA | 1800mA |
Awesome shope
Very satisfied with the things that we bought
And very reasonable prices too