IFlight BLITZ Mini F7 V1.2
Improved circuit design, better components and lower electrical noise!
DJI HD VTX Connector (Plug-and-Play / No soldering required)
FC indicator LEDs for visual debugging
October 20, 2023: Flight control Blackbox flash capacity changed from 16MB to 8MB
April 6, 2024: The flight control is updated to version V1.2, and the gyroscope is changed from BMI270 to ICM42688.
MCU: STM32 F722
Gyro: ICM42688
Barometer: DPS310
OSD Chip: AT7456
Flash: 8MB (Blackbox flash)
UARTS: 6
Motor outputs: 4x (SH1.0 connector)
I2C serial: SDA/SLA pads
Smartaudio / IRC Tramp VTX protocol supported
LED controller: Yes
Beeper pad: Yes
Firmware target: IFRC-IFLIGHT_BLITZ_F722
Mount pattern: 20×20 mm / 4mm PCB hole diameter, silicon grommets for M3 screws
Dimensions: 30.5×27 mm
Weight: 5g
- UART 1 for VTX HD / Analog
- UART 2 for a Receiver
- UART 3/4/5 for GPS or other sensors that require a serial port
- UART 6 for ESC Telemetry
- 1 x BLITZ Mini F7 V1.2 Flight Controller
- 1 x FC connectors
- 1 x Silicon grommets
BLITZ Mini F7 FC Wiring Diagram V1.116/05/2024 2.55MB
BLITZ Mini F7 FC Wiring Diagram 05/07/2023 5.54MB
Recommended ESC- IFlight BLITZ Mini E55S 4-IN-1 ESC-20x20mm
Recommended VTX- IFlight Force 5.8GHz 600mW Adjustable VTX
Reviews
There are no reviews yet