IFlight BLITZ Mini F4
IFlight BLITZ Mini F4 Improved circuit design, better components and lower electrical noise!
DJI HD VTX Connector (Plug-and-Play / No soldering required)
FC indicator LEDs for visual debugging
MCU:STM32F405
Gyro:MPU6000
Baro: NO
Betaflight OSD: IFLIGHT OSD (AT7456E)
Blackbox: 16MB
UARTS: 6
I2C serial: SDA / SLA pads
Smartaudio / IRC Tramp VTX protocol supported
LED controller: Yes
Beeper pad: Yes
Firmware target : IFRC-IFLIGHT_BLITZ_F405
Mounting:20*20mm/φ4
Dimensions:30.5*27mm
Weight:5.0g
PACKAGE INCLUDES:
- 1pc x BLITZ Mini F4 Flight Controller
- 1set x silicon grommets
- 1 x SH1.0 9pin connector for HD VTX/Analog VTX&CAM (5v/Bat/G/VO/T1/R1/5V/G/VI)
- 1 x SH1.0 8pin connector for ESC (R6/Cur/M4/M3/M2/M1/Bat/G)
- 1 x SH1.0 6pin connector for Radio Reciever (3.3V/R2inverted/ 5V/G/R2Non Inverted/T2)
- 1 x SH1.0 4pin connector LED or Buzzer (Buz/LED/5V/G)
WIRING SUGGESTION:
- UART 1 FOR VTX HD / ANALOG
- UART 2 FOR A RECEIVER
- UART 3/4 FOR GPS OR OTHER SENSORS THAT REQUIRE A SERIAL PORT
- UART 6 FOR ESC TELEMETRY
TIPS:
- F405 MCU DOES NOT HAVE AN INVERTER ON ALL UARTS, INVERTER ONLY ON UART 2.
- SBUS, CRSF, ELRS, IBUS, DSM ETC… CAN BE CONNECTED TO ANY UNUSED UART_RX, WE SUGGEST YOU CONNECT TO UART_RX2
- FRSKY SMARTPORT, TRAMP & SMARTAUDIO CAN BE CONNECTED TO ANY UNUSED UART_TX, WE SUGGEST YOU CONNECT TO UART_TX1
- F.PORT CAN BE CONNECTED TO ONLY UART_TX2 AND MUST TURN ON INVERSION IN FLIGHT CONTROL PROGRAM.
https://drive.google.com/drive/folders/17Uf67I6ER_z-otviR0I7tSqO31W7S553
Wiring Diagram ( Click the Image to open in Full Size )
Recommended ESC – IFlight BLITZ Mini E55S 4-IN-1 ESC-20x20mm
Reviews
Clear filtersThere are no reviews yet.